Playback Functions

This section describes useful functions that can be used during playback.

Displaying information (data codes) recorded on a tape

If you record on a tape using a Sony digital HD video camera recorder or digital camcorder, the recording information (data codes) is recorded on the tape. During playback, you can check the recording date and time from the data codes by displaying this information on the unit. Each time you press the DATA CODE button on the Remote Commander, the display switches between no data code display and recording date/time display. Also, you can change the display by setting [DATA CODE] in the [DISPLAY SET] menu.

For details, see “DATA CODE” on page 75.

No indicator

Recording date/time

Date

JAN 1 2008

12:00:00AM

Time

Notes

•If data codes were not recorded, “- - -” appears instead.

•The unit cannot record or play back camera data.

Recording and Playback 2 Chapter

Chapter 2 Playback and Recording

39