Digital Hours Meter
The digital hours meter keeps cumulative counts of the total operation time, the head drum rotation time, the tape running time and the number of unthreading operations. These counts can be displayed on the menu. Use them as guidelines for scheduling maintenance. In general, consult your Sony dealer about necessary periodic maintenance checks.
The digital hours meter has the following four display
modes and you can check them in [HOURS METER] of the [OTHERS] menu (page 81).
• OPERATION mode
The cumulative total hours of operating time is displayed in
• DRUM RUN mode
The cumulative total hours of drum rotation with tape threaded is displayed in
• TAPE RUN mode
The cumulative total hours of tape running time is displayed in
• THREADING mode
The cumulative number of tape unthreading operations is displayed in
About the
The unit is provided with a rechargeable battery that retains the date/time and various settings regardless of
Charging the rechargeable battery Connect the power cord (supplied) to the AC IN connector and then connect the mains connector to an outlet. Keep the POWER switch on the rear side of the unit in the “” position (ON) for about 24 hours.
(The ON/STANDBY switch on the front panel does not need to be turned on.)
Notes on the License
ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT COMPLIES WITH THE
Maintenance 6 Chapter
Chapter 6 Maintenance | 95 |