2 Press the j button.
Duplicating mode ends.
Duplicating a series of tapes
While pausing duplication mode, you can change the tape on the player. Therefore, you can duplicate a series of tapes on a single tape.
To change the tapes
1 By playing back the tape on the player to the end or by pressing the STOP button on the unit, confirm that the player has entered the playback pause mode.
During pause, the confirmation display appears.
00:12:34:12
DUPLICATE PLUS
Can adjust start position or change cassette.
[ X ] : RESTART [ x ] : END
2 Eject the tape in the player, and load the other tape.
00:12:34:12
DUPLICATE PLUS 
Can adjust start position or change cassette.
PLAYER :
[ X ] : RESTART [ x ] : END
When [AUTO REW] is set to [ON], 
is displayed.
You can eject the tape on the recorder to insert a new tape at this time.
3 Press the J button.
Duplication starts again.
When [AUTO REW] is set to [ON], the newly inserted tape is rewound automatically.
Notes
•When you change the source tapes, the beginning of the connecting portion of the recorded content of the work tape may be distorted.
•When you start duplication again, the beginning of the recorded content of the work tape may be distorted as playback starts again.
Detecting a blank portion during duplication
If the unit detects a blank portion on the source tape during duplication, it skips the blank portion automatically, reducing the length of the recorded part of the tape.
The operations of the player and recorder (the unit) when a blank portion is detected are as follows:
Detected status on | Player/Recorder (the unit) |
source tape | operation |
|
|
Detects a blank portion | Player: Continues playing the |
| tape. |
| Recorder: Continues |
| recording. |
|
|
Certain number of | Player: Continues playing the |
seconds after detection of | tape for another certain |
a blank portion | number of seconds and |
| searches forward. |
| Recorder: Stops. |
|
|
Detects next recorded | Player: Rewinds the tape at |
portion | about |
| normal speed to the |
| location immediately |
| before the blank |
| portion ends. |
| Recorder: Remains stopped. |
|
|
Returns to the location | Player: After entering the |
immediately before the | playback pause mode, |
blank portion ends | starts playing the tape. |
| Recorder: After entering the |
| recording pause mode, |
| starts recording. |
|
|
The unit performs the above operations automatically to reduce the blank portions of a tape during duplication.
Notes
•Depending on the specifications, the skip function may not work on some players.
•When the unit resumes duplication, the first part of the recorded portion on the source tape may be dropped on the copied tape.
•A recorded portion of less than one minute between two blank portions may not be duplicated.
Computer a Connecting and Dubbing, Audio Duplication, Jack, LINK.i the Using Equipment Other to Dubbing 4 Chapter
Chapter 4 Dubbing to Other Equipment Using the i.LINK Jack, Duplication, Audio Dubbing, and Connecting a Computer | 61 |