| Location and Function of Parts | |
| p SHUTTLE MAX button | |
| ||
| ||
| ||
| During tape playback, press this button to play back the | |
| ||
| ||
| ||
| video at the maximum speed. | |
| ||
| ||
| ||
| ||
| q INDEX MARK button | |
| ||
| ||
| ||
| ||
| ||
| ||
| ||
1Chapter | Press this button during recording to mark an index. | |
For details on indexes, see “Marking an index” on page 50. | ||
| ||
Overview | r END SEARCH button | |
part for only 5 seconds and stop automatically. Once | ||
| Press this button to play back the end of the last recorded | |
| you eject the video cassette, this function does not | |
| operate. | |
| s 1 (on/standby) button |
Notes
•The command mode of the supplied Remote Commander is set to VTR4. You cannot change the command mode setting.
•Set [COMMANDER] in the [OTHERS] menu to
[WIRELESS] to enable the Remote Commander to control the unit (page 80).
•In addition to the Remote Commander supplied with the unit, the unit accepts signals from any Sony Remote Commander with a command mode set to VTR4.
To disable control from Remote Commander, set [COMMANDER] in the [OTHERS] menu to [CONTROL S].
Before using Remote Commander
Remove the insulation sheet before using the Remote Commander.
Insulation sheet
To change the battery of the Remote Commander
1 While pressing on the tab, inset your fingernail into the slit to pull out the battery case.
2 Place a new battery with the + side facing up.
3 Insert the battery case back into the Remote Commander until it clicks.
Tab 
Note on batteries
When the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
WARNING
Battery may explode or leak if mistreated. Do not recharge, disassemble or dispose of in fire.
Caution
Replace the battery with the specified type only. Otherwise, fire or injury may result.
22 Chapter 1 Overview