Sony MDR-DS8000 Connecting the Headphone System, Setup, 1Connection

You can place the processor in an upright position or on its side.

To use in an upright position:

Use a coin to attach the supplied stand to the bottom of the processor.

To use on its side:

Place the processor so that the four rubber supports are at the bottom.

Rubber supports

Notes

•Install the processor in a location where there are no obstructions between the processor and headphones when used.

•Do not install the processor in unstable locations, such as on top of the TV. If the processor falls down, it could cause an injury or be damaged.

•If the processor is placed in an upright position, always attach the stand for added safety.

•If the processor is placed on its side, the full infrared transmission range may not be obtained depending on installation conditions.

•If the processor is placed on its side, do not place the processor on the side not having the rubber supports.

12GB Connection