Setting the input level

If the volume is low using analogue input, set the ATT (attenuator) switch to “0dB”.

0dB

ATT

–8dB

Setting

Connected components

0dB

TV, portable components, and other components with a low output level

 

 

–8dB

Other components (initial settings)

 

 

Notes

•Be sure to lower the volume before setting the ATT switch.

•If audio input to the LINE INPUT jacks is distorted (sometimes, noise can be heard at the same time.), set the ATT switch to “–8dB”.

Plugging into the wall outlet

Processor

AC power adaptor

To the wall outlet

To DC IN jack

Notes

•Be sure to use the supplied AC power adaptor. Using AC adaptors with different plug polarity or other characteristics can cause product failure.

Unified polarity plug

•Be sure to always use the supplied AC power adaptor. Even AC power adaptors having the same voltage and plug polarity can damage this product due to the current capacity or other factors.

Connection 15GB