9 Set the head tracking function to ON. (Only when an item other than “OFF” is selected in step 6 on page 19.)
Face the source (for example, your TV) and switch the HEAD TRACKING switch to ON. Wait for 2 seconds without moving.
Do not move your head until the head tracking system is stabilized. No sound is output for this period.
After the head tracking system stabilizes, playback sound can be heard.
After this, even if you turn your head in any directions, the sound will be heard as if from the front.
Notes
•Always wear the headphones vertically (as shown on page 17) so that the head tracking system will be stable.
•Whenever the HEAD TRACKING switch is set to ON, and whenever you put on the headphones with its power on, always wait for 2 seconds without moving your head as the head tracking system newly stabilizes each time.
•If the sound from the headphones (while facing your TV) seems to be different from the actual direction of your TV, face forwards and press the RESET button on the headphones.
The headphones automatically turn off when they are taken off
— Auto Power On/Off Function
When not in use, be careful not to hang the headphones in such a way as to activate the Auto Power On function, as this will consume battery power.
To check the remaining battery power
Pull up the
Charge the rechargeable batteries or use new alkaline batteries if the POWER indicator flashes and an intermittent beep sound is heard from the headphones.
Transition time between modes
POWER indicator
When pressing buttons on the processor to change to new modes, the transition time between modes may vary. This is due to differences in system control between modes.
(Continued)
Operation 21GB