The bend radius of the optical digital connecting cable should be no less than 25 mm.
25 mm

Connecting cables (sold separately)

•Use an optical cable (POC-5A, etc., sold separately) to connect more than two external components.

•Use the POC-5AB (mini-plug y rectangular plug, sold separately) when connecting the digital output mini-jack on portable DVD players, portable CD players, or other digital components to the DIGITAL IN jack.

Optical digital selector (sold separately)

Use of the SB-RX100P (Optical digital selector (4-line input, 3-line output), sold separately) is recommended when connecting more than one digital

component.

Notes on optical digital connecting cable

•Do not drop objects on the optical digital connecting cable or expose the cable to shocks.

• Grasp the plug to connect or disconnect the cable.

•Be sure that the ends of the optical digital connecting cable are kept clean. Dust at the ends of the cable can degrade performance.

•When storing the system, attach the cap to the end of the plug and be careful not to fold or bend the optical digital connecting cable with a bend radius less than 25 mm.

Connecting the processor to analogue components

Use an audio cord (sold separately) to connect to the audio output jacks on the VCR, TV, or other component to the LINE IN (L/R) jacks on the processor.

Processor

VCR, TV, or other component

To LINE IN jacks

To audio output jacks

Audio left (L, white)

Audio left (white)

Audio cord

(sold separately)

Audio right (red)

Audio right (R, red)

Connecting cables (sold separately)

Use the RK-G129 cable (stereo mini-plug y pin plug x 2) when connecting a stereo mini-jack (line out jack or headphones jack) to the LINE IN jacks.

In this case, set the volume on the player at a medium level. Noise can occur if the volume on the player is set too low.

See page 29 for details about other connecting cables (sold separately).

14GB Connection