Connecting the processor to digital components

Use the supplied optical digital connecting cable to connect the optical digital output jack on a DVD player (or LD player), Digital TV, or other digital component to the DIGITAL IN 1 or 2 jack of the processor.

Processor

To DIGITAL

IN jack

Optical digital connecting

To optical

digital

cable (supplied)

output jack

Match the orientation of

 

the plug with the jack, and

 

then insert until the plug

 

fits into place.

 

(sold separately)

 

DVD player, LD player, BS digital tuner, or other digital component having an optical digital output jack

Notes

•The optical digital connecting cable is an extremely high-precision device and is sensitive to jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.

•This system is not provided with AC-3 RF jacks, and so AC-3 RF signals from LD players cannot be directly input.

•The digital input for the processor does not support sampling frequencies of 96 kHz. Set the digital output setting for the DVD player to 48 kHz when using this system. Noise may be heard when a 96 kHz digital signal is input.

DTS

•A DTS-compatible DVD player is required for the playback of DVDs recorded in DTS audio. (For more details, see the instruction manual of the DVD player.)

•When playing LDs and CDs recorded in DTS format, noise may occur when fast forwarding or rewinding. This is not a malfunction.

•If the DTS digital output is set to “OFF” on the DVD player, no sound may be heard even if the DTS output is selected in the DVD menu.

•No sound may be heard when a DVD player and this unit is analogue connected. In this case, use a digital connection.

(Continued)

Connection 13GB