If an audio signal is not input for 10 minutes

Infrared signal emission from the processor automatically stops when an audio signal is not input for 10 minutes. The infrared signals are automatically emitted when an audio signal is input again. The emission of the infrared signals may stop when an extremely low sound is emitted for about 10 minutes during analogue input. If this happens, raise the volume of the connected audio and video component and lower the volume of the headphones.

Notes

•There may be differences in brightness of the infrared emitter on the digital surround processor. However, this does not affect the transmission area.

•The headphones should be used within the infrared transmission area (see “Infrared transmission area” on page 22).

•Do not use this system in areas exposed to direct sunlight or strong light. The sound may be interrupted.

•These open-air headphones are so designed that sound may also leak outside the headphones. Be careful not to turn up the volume too high that it bothers people around you.

•The surround sound effect may not be obtained from sound sources which do not incorporate video, such as music CDs.

•This system simulates the average HRTF* common to most people. However, the effect can differ from person to person since the HRTF can vary between individuals.

*Head Related Transfer Function

Operation 23GB