Headphone Parts Descriptions

5

6

4

7

 

1

3

 

 

8

2

9

 

1

 

1Infrared sensor

There are infrared sensors in two locations on both sides.

2Battery case

Press and lift up the lid to open it. This battery case is for the supplied rechargeable batteries and R6 (size AA) alkaline batteries only.

3Self-adjusting band

The headphones automatically turn on when you put on the headphones.

4POWER indicator

By pulling up the self-adjusting band, the indicator lights red when battery power is sufficient.

5RESET button (See page 21 for details)

Use to reset the location information of the head tracking function.

6HEAD TRACKING switch (See page 21 for details)

To activate the head tracking function, switch it to ON when the output mode of the processor is set to VIRTUAL (other than OFF).

7VOL (Volume) control

Use to adjust the volume.

8Ear pad (right)

9 Ear pad (left)

8GB Preparation