Getting Started
Position of selector | Output level |
+4dBu | A signal of |
| is output at the level of +4 dBu. |
A signal of | |
| is output at the level of |
The specifications of the BALANCE I/O connector are shown below.
Input terminal | Output terminal |
1: GND | 1: GND |
2: HOT | 2: HOT |
3: COLD | 3: COLD |
xWhen connecting with digital components (CD player, DAT recorder, other MD recorders, mixer with a coaxial digital input connector)
When this recorder is connected with a CD player, MD recorder, or DAT recorder, digital recording is possible. Use a coaxial digital connecting cable that can be purchased separately.
When the coaxial digital cable is used
MD recorder | Digital component |
DIGITAL | DIGITAL | |
IN | COAXIAL | |
|
| |
| IN | OUT |
OUT |
|
|
COAXIAL |
|
|
| ‚ |
|
| ‚ |
|
•: Flow of signal
zA sampling rate converter is mounted in this recorder
All digital input signals are converted to the sampling frequency (44.1 kHz) of an MD recorder for recording.
Therefore, this allows you to record sources such as 32 or 48 kHz DAT or satellite broadcasts, as well as CDs and MDs.
3Connect the power cord.
16