Sony MDS-E12 operating instructions Edit Menu Table, Last Mode Memory

Menu item	Function	Parameters	Factory	Page(s)
			setting
Relay	Turns relay function off	Off	Off	56
	Sets relay playback function	Play		56
	Sets relay record function	Rec		56
Play/Pause	Enables eject during playback	Enable	Enable	28
Z	Disables eject during playback	Disable		28
Next Tr Play	Reserve the next track during play.	On/Off	Off	30
Date Time	Sets display of date	YYYY MM DD	YYYY MM DD 17
		MM DD YYYY		17
		DD MM YYYY		17
Parallel	Sets and confirms assignment of	Mode User	—	57
	parallel input-output terminal	Mode Preset	—	57
Keyboard	Selects the type of keyboard	Type US	US	59
		JP		59
		10-Key		59
	Assigns characters to keyboard	Assign?	—	62
Calendar	Sets clock and date	—	—	17

Edit Menu Table

The following table provides a quick guide to the various editing functions that can be performed.

To access the Edit Menu

Press MENU/NO to display “Edit Menu”

(Note : The available menu items may vary depending on the current status of the recorder.)

Menu item	Sub item	Function	Reference page
Name?	Nm In?	Names track or MD	46
	Nm Erase?	Erases name	49
	Nm AllErs?	Erases all names	49
	Nm Copy?	Copies name	48
	Nm AllCopy?	Gives the same name to all tracks	48
Tr Erase?	—	Erases a track	41
Move?	—	Moves a track	44
Combine?	—	Combines tracks	43
Divide?	—	Divides a track	45
A-B Erase?	—	Erases a portion of a track	42
All Erase?	—	Erases all the tracks on an MD	42
M-Tr Erase?	—	Erases consecutive tracks at one time	42
M-Tr Combin?	—	Combines consecutive tracks at one time	43
S. F Edit?	Tr Level?	Changes the overall recorded level after recording	50
	Fade In?	Records over a track using Fade-in Recording	51
	Fade Out?	Records over a track using Fade-out Recording	51
Undo?	—	Undoes the last edit operation	50
Setup?	—	Enters Setup Menu	—

Last Mode Memory

This function remembers the last mode of the recorder after power was turned off. When the power is turned on again, playback begins under the same conditions.

However, when the MD is ejected, the following functions are not applied.

•Setting of Program track numbers and track order

•Setting of Multi-access track numbers and track order

•Setting of Variable Speed Play

•MARK point

•RAM edit contents

*Functions of the Setup Menu such as level, ON/OFF, time, etc., will remain.

Additional Information

71