Sony MDS-E12 M e m o r i z i n g M.ACCESS, Multi-accessplay Z, Checking the program

If you entered the wrong track number

Press m repeatedly until the wrong track number appears and turn AMS (or press ./> ) to enter a correct track number. Press CLEAR to erase the track order so that the track order is moved up.

To enter a track number over 26

Use >25. For details, see page 29.

4Repeat step 3 to store the track you want to access.

5Press YES.

“Complete!” appears and the track order and track number to be stored are completed.

6Turn AMS (or press ./> repeatedly) to select “Play Mode” of “Setup Menu” then press AMS or YES.

7Turn AMS (or press ./> repeatedly) to select “M.Access” then press AMS or YES. (Press M.ACCESS after step 5 for the remote.)

“M.Access” and “1” (Single Play) light up and “Memorizing” (during recording) flashes, then the normal screen is returned.

M e m o r i z i n g M.ACCESS

1

Note

If the MD is inserted when Multi-access Play is selected, “Memorizing” flashes and track numbers 1 to 10 in the track order are recorded and programmed automatically.

To stop “Memorizing”

Press x (stop) when “Memorizing” is flashing. “Memorizing” stops and “Play Mode” returns to normal play (CONTINUE).

Multi-access play Z

Press the Number buttons on the remote you want to play the track order.

zTo play by the recorder

Turn AMS to select the track order, then press AMS.

To resume normal play

While the recorder is stopped, press CONTINUE on the remote. “M.Access” and “1” at the display window turn off.

zThe program is stored until the MD is ejected

If the play is stopped or Play Mode is changed and “M.Access” turns off, the program is stored. If the multi-access is selected again, “Memorizing” flashes and the entered program is stored in memory.

Notes

•If the MD is ejected, the program will be lost.

•“ProgramFull” appears when you try to program 11 th track.

•The set program will be lost when you try record or edit operation.

Checking the program

1While the recorder is stopped, press MENU/NO twice.

“Setup Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) to select “M.Access?” then press AMS or YES.

3Press m/M repeatedly for checking.

4Press MENU/NO to return normal display.

Changing the contents of the program

Do steps 1 to 2 of “Checking the program” and follow the procedures below.

To	Do the following:
Erase a track	Press m/M repeatedly until the
	number of the unwanted track
	appears, then press CLEAR.
Erase all tracks	Press CLEAR repeatedly until all the
	track numbers disappear.
Add a track to the	Press M repeatedly until the track
end of the program	order in which “0” flashes, then do
	step 3 of “Programming access play
	tracks” on page 34.
	If 10 tracks are programmed,
	“ProgramFull” appears and no
	addition is made.
Replace a track	Press m/M repeatedly until the
	changed track order appears, then do
	step 3 of “Programming access play
	tracks” on page 34.

Playing MDs

35