Sony MDS-E12 R e h e a r s a l, 3 m 4 3 s 0 4 f, Pausing After Each Track Auto Pause

Fine adjusting the marked point

(Rehearsal)

You can fine adjust the determined point while monitoring the sound of play.

1While the recorder is stopped, press MENU/NO twice.

“Setup Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) to select “Mark Rehear”, then press AMS or YES.

“-Rehearsal-” flashes and play is repeated for several seconds from the already determined point.

Pausing After Each Track (Auto Pause)

You can set the MD recorder so that it pauses automatically at the beginning of the next track after play back of each track. This is convenient to record one track only or several uncontinuous tracks.

M.ACCESS

CONTINUE SHUFFLE PROGRAM

1 2 3 4 5

- R e h e a r s a l -	AUTO CUE	16	17	18	19	20
		6	7	8	9	10
		11	12	13	14	15

3 m 4 3 s 0 4 f	A.PAUSE	21	22	23	24	25
	A.CUE	>25
		NAME CHAR NUM
3 Turn AMS (or press ./> repeatedly) to move
the location of a track.
You can slide a position for each frame* (f) (1 frame =					RM-DR1J
1/86 seconds).	Press AUTO CUE repeatedly until “A.PAUSE” appears at
* Moraural or LP2 stereo tracks move two frames at a
	the display window. (Or press A.CUE/A.PAUSE.)
time, LP4 stereo tracks move four frames at a time.
To set quickly, press m/M repeatedly in step 4.
Change units advanced when AMS is turned (or ./
> is pressed) to frames, seconds, or minutes.

4 After the point is determined, press AMS or YES.

Playing MDs

“Complete” appears and normal display is returned.

Notes

•If the point (MARK) is not determined, “Mark Rehear” of “Setup Menu” does not appear.

•Adjustment of the point in Rehearsal cannot be moved over the track.

To stop Auto Pause

Press AUTO CUE repeatedly until “A.PAUSE” at the display window disappears. (Or press A.CUE/A.PAUSE.)

To locate the marked point

When LOCATE is pressed, play pauses in the determined marked point. You can start playing again from the same location.

Notes

•When one of the following operations is performed, Mark is released. To play Locate, set Mark again.

·Eject the disc.

·Perform Edit Menu.

·Record.

•During the programmed play, if the LOCATE is pressed though the Track in which the marked point is not included to the playing program, “No Program” is displayed.

•Locate does not function during shuffle Play and Multi- access Play.

37