Operating the MD Recorder Using a Keyboard
Assigning Characters to Keyboard Keys
Assigning a character
If your keyboard layout is not that of an English or Japanese keyboard, the display may show the wrong characters, or no characters at all, when you press the keys. In this case, you must assign characters to the keys.
1While the recorder is stopped, press [Esc] twice.
“Setup Menu” appears in the display.
2Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly until “Keyboard?” appears; press [Enter].
3Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly until “Assign?” appears; press [Enter].
4Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly until the character you want to assign appears.
If the character has already been assigned, “User” appears. If it has not been assigned, “Default” appears.
5Press [Enter].
“<Set Key>” flashes in the display.
6Press the key to be assigned on the keyboard.
“Key change” appears, and the selected character is assigned to the key.
If “Same Key” appears
The same character is already assigned to the key.
If “Remove old assign?” appears
A different character is already assigned to the key. Press [Enter] to clear the current assignment and assign the new character. Press [Esc] to cancel.
Notes
•You can assign a character with [Shift] only for symbol and number keys.
•You can’t assign a character to the following keys: [Esc],
[Insert], [Delete], [Home], [End], [Page Up], [Page Down], [Num Lock], [←], [→], [−], [↓], and, on the 10- key, [/], [*], [_], [+].
Depending on the keyboard, some keys other than those above may also not be able to be assigned.
Clearing key assignments
Key assignments can be cleared one at a time, or all at once.
To clear a key assignment
1Do steps 1 to 3 of “Assigning a character” on this page.
2Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly the character you want to clear appears; press [Enter].
“<Set Key>” flashes in the display.
3Press [Delete].
“Key Clear” appears and the key assignment is cleared.
To clear all key assignments
1Do steps 1 to 3 of “Assigning a character” on this page.
2Press [Ctrl], [Alt] and [Delete] simultaneously.
“All Reset?” appears in the display.
3Press [Enter].
“Complete!” appears, and all assignments are cleared.
To cancel the operation
Press [Esc].
62
