Rear Panel
Terminal
Functions
This chapter provides information on the functions of the control and remote rear panel terminals.
Control terminal functions
Control terminal (CTRL-S)
This recorder allows external control by connecting system controller to the
Control functions
The functions are the same as for the recorder’s remote. Also, when a plug is inserted into the
Remote Terminal Functions
RELAY PLAY/REC
With the recorder connected to other recorders, the end of recording or playback on the first unit passes a control signal to the RELAY terminal, so that recording or playback automatically begins in the second unit.
By making the connection a loop, continuous playback is also possible.
Connection for relay playback or recording
Connection between the first recorder, set to RELAY OUT, and the second recorder, set to RELAY IN, is by a stereo
When more than two recorders are connected, both RELAY OUT and RELAY IN are connected in the same way.
The input and output signals are relayed by the direct connection between the output signal terminal of the first recorder and the input signal terminal of the second recorder. Though this connection, an input signal are relayed to all the other recorders as well; likewise the output signal is relayed through the direct connection with the other recorders.
Connection for relay play and recording
Set “RELAY” of “Setup Menu” to “OFF”.
To relay the input/output signal in “PLAY” or “REC”, the same operating conditions as for input monitor (page 22) are applied, and there are restrictions on operations.
Note
Please set the input selector of the recorder front panel in accordance with the connection to the input terminal.
55