Operating the MD Recorder Using a Keyboard
Naming a Track or MD Using the Keyboard
You can easily enter or edit names.
Short cut to the naming procedure
1To give a name to a track or MD, do the following.
•To name a track
Press Num Lock while the desired track number is displayed and the recorder is stopped, playing, paused or recording.
•To name a MD
Press Num Lock when no track number is displayed
and the recorder is stopped.
A flashing cursor appears in the display, and the characters can be entered.
2Enter the name
For more on editing during entry, refer to the chart below.
3Press the Enter key or Num Lock key
The disc or track name is displayed from its beginning.
Operations you may wish to do while naming a track or MD
To | Press |
Cancel the operation | [Esc] |
Switch between uppercase and | [Caps Lock] (or hold |
lowercase letters | down [Shift]* while |
| entering letters for |
| uppercase) |
Move the cursor | [←] or [→] |
Erase the character at the cursor | [Delete] |
position |
|
Erase the character preceding | [Back Space] |
the cursor |
|
*If you have assigned characters to keys using [Shift] (see page 62), the characters you assigned have priority.
zUndoing the naming of a track or MD 1 Press [F11]
“Name Undo?” appears.
2 Press [Enter].
Press [Esc] to cancel the operation.
Using the Edit Menu
1Do the following to name a track or MD.
•To name a track or MD
Press [Esc] while the recorder is stopped, playing or paused.
•To name a track during recording.
Press [Esc} during recording.
“Edit Menu” appears in the display.
2Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly until “Name?” appears, then press [Enter].
While the recorder is recording, a flashing cursor appears in the display, and you can enter a name for the track being recorded. In this case, please go to step 5.
3Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly until “Nm In?” appears, then press [Enter].
4Press [−]/[↓] or [Tab]/[Shift]+[Tab] repeatedly until the track number (when naming a track) appears or “Disc” (when naming the MD) flashes, then press [Enter].
Characters can be entered.
5Enter the name.
6Press [Enter] or [Num Lock].
“Complete!” appears for a few seconds, and the naming is completed.
60
