Rear Panel Terminal Functions
Electrical specifications
Input terminal
Input system | Make contact |
Input on voltage | 0.5V or less |
Input off voltage | 3V or more |
Open Terminal voltage | 5V |
Input pulse width | 100msec or more |
Input withstand voltage | _0.5 to +10V |
Output terminal
Output system | NPN transistor open collector |
On residual voltage | 0.5V or less |
On maximum inflow | 100mA |
current |
|
Withstand voltage | 20V |
Using Fader Play
By connecting the fader of the mixer to the terminal on the recorder which is set as the Fader PLAY of the parallel input, starting play and pause at the beging of the next track are synchronized to the fader of the mixer.
This can be used in the mixer equipped with fader remote function in which _∞ position (lowest position) is OFF and the other position are ON.
In the recorder, “AMS+” and “PAUSE” are carried out when the fader is OFF, and “PLAY” is carried out when the fader is ON.
Notes on Fader PLAY
• Operation on the final track number
When you want to continue to use Fader PLAY from the last track number, select the beginning of the track to use recorder manually. AMS+ cannot be used for the last track number. because it is aware that there is no next track number, SO for the final track number, momentarily turn the fader to the OFF position.
• To repeat one track
To repeat only one track with Fader PLAY, select the desired track with PROGRAM Mode, and set the REPEAT Mode to “REPEAT ALL”. In normal operation, the one- track repeat setting is operated by AMS+, which is the operating standard for making the next track
RS-232C
—D-sub 9-pin (male)
The recorder can be controlled externally through the use of other devices connected through this terminal. For protocols, please consult your dealer.
58