MDS-JE440

While monitoring the sound, turn AMS (or press

./> repeatedly) to change the recorded level without turning on “OVER” on the peak level meters.

Avoid turning on these indicators

5 Press AMS or YES.

“(S.F) Edit OK?” appears in the display.

6 Press AMS or YES.

 

 

The deck starts recording over the existing track.

 

 

“S.F Edit(:) ** %” appears while the track is being

 

 

recorded. An amount of time that is roughly equal to

 

 

or longer than the playback time of the track is

 

 

required when recording over the track. When the

 

 

recording finishes, “Complete!!” appears in the

 

 

display for a few seconds.

 

 

 

 

 

 

Editing

 

 

 

1 For MDS-JE640, press S.F EDIT.

 

 

Fade-in and Fade-out Recording

Recorded

 

1 Press MENU/NO.

 

 

“S.F Edit” appears in the display.

 

 

For MDS-JE440, do the following:

MDs

 

“Edit Menu” appears in the display.

 

2 Turn AMS (or press ./>repeatedly) until “S.F

 

 

Edit?” appears, then press AMS or YES.

 

 

2 Turn AMS (or press ./> repeatedly) until

 

 

“Fade In ?” or “Fade Out ?” appears, then press

 

 

AMS or YES.

 

 

3 Turn AMS (or press ./> repeatedly) until the

 

 

track number you want to change the recording

 

 

level appears, then press AMS or YES.

 

 

“Time 5.0s” appears in the display.

 

 

4 While monitoring the sound, turn AMS (or press

 

 

./> repeatedly) to change the Fade-in or

 

 

Fade-out Recording time.

 

 

The deck plays the portion that will be recorded over

 

 

using Fade-in or Fade-out Recording.

 

 

You can set the time at any value between 1 second

 

 

and 15 seconds, in 0.1 second increments. You cannot

 

 

set the time longer than the track.

 

 

5 Press AMS or YES.

 

 

“(S.F) Edit OK?” appears in the display.

 

 

6 Press AMS or YES.

 

 

The deck starts recording over the existing track.

 

 

“S.F Edit(:) ** %” appears while the track is being

 

 

recorded. When the recording finishes, “Complete!!”

 

 

appears in the display for a few seconds.

To cancel the operation

Press MENU/NO or x in steps 1 to 5. If you press AMS or YES in step 6 and recording starts, you cannot interrupt the operation.

z(For MDS-JE640) You can use Edit Menu to perform S.F Edit

1While the deck is stopped, press MENU/NO. “Edit Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “S.F Edit?” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) until “Tr Level ?,” “Fade In ?,” or “Fade Out ?” appears, then press AMS or YES.

4Turn AMS (or press ./> repeatedly) to adjust the recording level or Fade-in or Fade-out Recording time.

5Press AMS or YES.

Notes

•Do not disconnect the AC power cord or move the deck while recording is in progress. This may damage the recording data preventing recording from being performed properly.

•You cannot change the recorded level of a track recorded in LP2 or LP4 Stereo mode.

•Do not use an MD that is damaged or dirty. This may prevent recording data from being recorded properly.

•Repeatedly changing the recording level results in poor sound quality.

•The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level.

•The recording level cannot be changed while the timer is activated.

38 Changing the recorded level after recording