Step 2: Setting the time (continued)
3 Press ENTER.
The minute indication flashes.
Step 3: Presetting radio stations
You can preset 20 stations for FM and 10 stations for AM.
4 Press . or > repeatedly to set the minute.
5 Press ENTER.
?/1 | 1 | 3 |
(Power) |
The clock starts working.
Tip
If you’ve made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press . or > repeatedly to select
SET CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Note
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.
2 4 SHUTTLE
1 Press TUNER/BAND repeatedly until the band you want appears in the display.
Every time you press this button, the band changes as follows:
FM y AM
8
