Charging the battery pack
When the camera is turned on, you cannot charge the battery pack. Be sure to turn off the power of the camera.
AC power adaptor
Power cord (mains lead)
3 
2
to a wall outlet (mains)
1
Battery pack
1Insert the battery pack into your camera.
2Open the DC IN cover and connect the AC power adaptor to the DC IN jack of your camera with the v mark facing up.
3Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains).
The 
/CHG lamp (orange) above the LCD screen lights up when charging begins. When the 
/CHG lamp goes off, full charge is completed.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camera.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still record or play back images.
This indication may not be entirely accurate depending on the conditions of use and the operating environment.
Charging at a room temperature of 10°C to 30°C (50°F to 86°F) is recommended.
10