
Viewing images using a computer
You can view data recorded with your camera on a computer. This section describes the general method for viewing images on a computer and installing the driver into a computer. Be sure to also see the operation manuals for your computer and application software. To view images on the
<<Recommended Windows environment>>
You can view images on a Windows computer in the following three ways, A, B, and C. Check the computer environment below, then follow the procedures described on pages 37 to 42.
AViewing images with a
Finalize the disc beforehand (page 32).
OS:Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional The above OS is required to be installed at the factory.
Operation is not assured in an environment upgraded to the operating systems described above.
BViewing images with a computer connected with the USB cable (page 38)
There are two ways to make the USB connection, which are the normal connection and the PTP connection (page 86). This is set using [USB CONNECT] in the setup settings. However, any OS does not conform to [PTP] as of February 2001. Here describes the way using the [NORMAL] setting.
You do not need to finalize the disc. You have to install the USB driver and the software, DirectCD included in the supplied
OS:Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional The above OS is required to be installed at the factory.
Operation is not assured in an environment upgraded to the operating systems described above.
CPU:MMX Pentium 200 MHz or faster
The USB connector must be provided as standard.
The
Playback B
35