7Connect the USB jack on your camera with the USB connector on your computer using the supplied USB cable.

to the USB connector

to the USB jack

 

 

Push the

USB cable

connector as

computer

far as it will go

8The computer automatically recognizes the camera.

Open [ My Computer], the newly recognized drive (Example: (E:)) is added. Installing driver is complete.

9Insert the disc into the camera, connect the AC power adaptor to the camera, then turn on the power of the camera.

Go to “Viewing images” below. If you remove the disc without viewing an image, be sure to read “Before disconnecting the USB cable” on page 40.

Viewing images

When you view images on the disc which was not finalized, you have to install DirectCD included in the supplied CD-ROM. For details on DirectCD, refer to the software operating instructions of DirectCD.

E.g., for Windows Me users

1Turn on your computer and allow Windows to load.

2Connect the USB jack on your camera with the USB connector on your computer using the supplied USB cable.

to the USB connector to the USB jack

 

USB cable

Push the

computer

connector as far

 

 

as it will go

 

 

3Insert the disc into the camera, connect the AC power adaptor to the camera, then turn on the power of the camera.

“USB MODE” appears on the LCD screen of the camera.

Playback B

39