5

6

7

8

Open “Device Manager” on Windows.

For Windows 98, Windows 98SE and Windows Me users:

1Open [Control Panel] from [ My Computer], then double-click [System].

2“System properties” is displayed. Click the [Device Manager] tab located at the top.

3Click [ CD Mavica] in [ Other devices], then click the [Remove] button located at the lower-right corner.

For Windows 2000 Professional users:

*Log in with the permission of administrator.

1Open [Control Panel] from [ My Computer], then double-click [System].

2“System properties” is displayed. Click the [Hardware] tab located at the top, then click the [Device Manager (D)] button.

3Click [View] in [Device Manager], then click [Devices by type (E)].

4Right-click [ CD Mavica] in [ Other devices], then click [Uninstall...].

After the message appears to verify that you delete the device manager, click “OK.”

Turn off the camera, disconnect the USB cable, and restart the computer.

Install the USB driver in the supplied CD-ROM to the computer following the procedure on page 38.

Battery packs

Symptom

Cause and/or Solution

The battery pack cannot

The power of the camera is turned on.

be charged.

tTurn off the power of the camera (page 10).

The battery life is short. You are recording/playing back images under extremely cold temperatures.

The battery pack is not charged enough. tCharge the battery pack fully.

The battery pack is dead.

tReplace the battery pack with a new one.

98