Sony MVC-CD200, MVC-CD300 manual 96

Symptom	Cause and/or Solution
The image cannot be	• The disc has not been finalized.
played back on the CD-	tFinalize the disc (page 32).
ROM drive of your	• An error occurs during recording by vibration.
computer.
	tPossibly, you may be able to play back images if
	you connect the camera to your computer with
	the USB cable.
	• The CD-ROM drive does not correspond to the
	packet-write system or does not conform to the
	MultiRead type.
	tConsult the computer or the CD-ROM drive
	manufacturer.
	• Causes not described above are occurred.
	tConsult the computer or software manufacturer.
Your camera cannot delete	• The disc is not initialized.
an image.	tInitialize the disc (page 18).
	• The disc space is not sufficient.
	tThis is not a malfunction.
	• The image is protected.
	tCancel the protection (page 78).
The power turns off	• If you do not operate the camera for about three
suddenly.	minutes while the power is on, the camera turns off
	automatically to prevent wearing down the battery
	pack.
	tTurn on the camera.
	• The battery pack is discharged.
	tReplace it with a fully charged battery pack.
The image does not	• The [VIDEO OUT] setting of your camera is
appear on the TV screen.	incorrect.
	tChange the setting (page 85).
The SLIDE SHOW	• The SLIDE SHOW function stops after about
function stops	20 minutes.
automatically.	tTo continue the slide show, select [START]
	again (page 74).
The macro function does	• [SCENE SELECTION] is set to [LANDSCAPE] in
not work.	the setup settings.
	tCancel the SCENE SELECTION function
	(page 58).
	• [CONVERSION LENS] is set to [ON] in the setup
	settings (MVC-CD300 only).
	tSet it to [OFF] (page 85).

96