Notes

Operations are not guaranteed if you connect two or more USB equipment to a single computer at the same time (except for the USB keyboard and mouse which are provided as standard), or when using a hub.

Depending on the type of USB equipment that is used simultaneously, some equipment may not operate.

Operations are not guaranteed for all the recommended computer environments mentioned above.

CViewing images with a CD-R/CD-RW drive (page 41)

You do not need to finalize the disc. You have to install the software, DirectCD included in the supplied CD-ROM. For details on Windows environment, refer to the software operating instructions of DirectCD.

<<Recommended Macintosh environment>>

You cannot view images on a Macintosh computer by USB connection.

Install the driver, Adaptec UDF Volume Access included in the supplied CD-ROM into your computer and finalize the disc to view images.

Macintosh computer with the Mac OS 8.5.1/8.6/9.0 standard installation QuickTime 3.0 or later must be installed.

Note

Operations are not guaranteed for all the recommended computer environments mentioned above.

Notes on using your computer

Software

Data recorded with your camera is stored in the following formats. Make sure that applications that support these file formats are installed on your computer.

Still image (except TEXT mode, uncompressed mode and Clip Motion): JPEG format

Moving image/Voice memo: MPEG format

Uncompressed mode still image: TIFF mode

TEXT mode/Clip Motion: GIF format.

Depending on your application software, the file size may increase when you open a still image file.

When you copy the image to the camera from your computer, which was modified with a retouching software and was converted to another file format, the “FILE ERROR” message may appear and you may be unable to open the image.

Depending on your application software, only the first frame of the Clip Motion file may be played back.

Communications with your computer (for Windows only)

Communications between your camera and your computer may not recover after recovering from Suspend or Sleep.

36