Sony MVC-CD200, MVC-CD300 Viewing images on a TV screen

Mode dial:

Before connecting your camera, be sure to turn off the TV.

Set the TV/VIDEO switch to “VIDEO”.

A/V connecting cable

to A/V OUT (MONO) jack

1 Set the mode dial to .

2 Connect the A/V connecting cable to the A/V OUT (MONO) jack of your camera and to the audio/video input jacks of the TV.

If your TV has stereo type input jacks, connect the audio plug (black) of the A/V connecting cable to the Lch jack.

3 Turn on the TV and start playback on your camera.

The playback image appears on the TV screen.

Notes

•You cannot use a TV that has an antenna (aerial) connector only.

•When viewing a still image on the TV, the black band may appear around the image.

•When images are not displayed on the TV screen, check that the VIDEO OUT item (page 85) is set to the appropriate position.