
Notes
•It takes for about one minute to execute the finalization. Do not shake or jar the camera during this operation. Place the camera on a stable surface during the finalization.
•When you execute the finalization, we recommend that you use the external power source (page 13).
Canceling the finalization (UNFINALIZE) (only for
When using
1Set the mode dial to the , S, A, M, SCN, or
.
“UNFINALIZE PLACE ON LEVEL SURFACE” appears on the LCD screen. Be sure to avoid any vibration during the unfinalization.
UNFINALIZE
PLACE ON LEVEL SURFACE
READY?
O K
CANCEL
OK
2Select [OK] with v on the control button, then press z.
Unfinalization starts and the disc remaining indicator changes from to
.
| UNFINALIZE |
| UNFINALIZE |
| UNFINALIZE | |||||
| AVOID ANY VIBRATION |
| AVOID ANY VIBRATION |
|
|
|
| |||
| READY TO UNFINALIZE |
| UNFINALIZE IN PROGRESS |
| UNFINALIZE COMPLETE | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To cancel the unfinalization
Select [CANCEL] with V on the control button in step 2, then press the center z. When it is canceled, you can continuously record an image on the
To unfinalize after canceling the unfinalization
Set the mode dial to SET UP, then execute [UNFINALIZE] from [ ] (DISC TOOL) in the setup settings (page 84).
Notes
•Unfinalization cannot be executed when you record a new image or edit an image on the CD- RW after executing the finalization.
•It takes about one minute to execute the unfinalization. Do not shake or jar the camera during this operation. Place the camera on a stable surface during the unfinalization.
Tip
You can also execute the unfinalization using [ ] (DISC TOOL) in the setup settings (page 84).
34