18EN
Playing MDs

Locating a Specific Track on an

MD

You can quickly locate any track while playing a disc

by using AMS (Automatic Music Sensor), = and

+, number buttons or M.SCAN on the remote.

Press MD (or set CD/MD to MD) to switch the
function of the buttons to MD.
Number
buttons
CD/MD switch
r
6
+=
pP·
M.SCAN
>25
·
=/+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
≠ AMS ±
Pp
0)
§
MD
≠ AMS ±

To locate Do the following:

The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly Z
By scanning each
track (music scan) Z
zWhen you directly locate a track with a number over

25 Z

You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter “0,” press button 10.
Examples: • To play track number 30
Press >25 once, then 3 and 10.
• To play track number 100
Press >25 twice, then 1, 10 and 10.
While playback, turn AMS clockwise
(or press + repeatedly) until you
find the track.
While playback, turn AMS
counterclockwise (or press =
repeatedly) until you find the track.
Press number buttons to enter the
track number.
1Press M.SCAN before you start
playing.
2When you find the track you want,
press · to start playing.
n
zYou can extend the playing time during music scan

Z

While the player is stopped, press M.SCAN repeatedly
until the playing time you want (6, 10 or 20 seconds)
appears in the display. Each time you press the button,
the display changes as follows:
M. SCAN 06s n M. SCAN 10s n M. SCAN 20s
(6 sec.)(10 sec.)(20 sec.)
zTo pause playback at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
zTo go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total number of tracks and total disc
playing time, remaining recordable time of the disc, or
disc title (see page 17).