4 Press . or > repeatedly until the following item appears in the display, and then press ENTER.
When labeling a | “ | : Name” |
track |
|
|
|
|
|
When labeling a | “ | : Name” |
disc |
|
|
|
|
|
The cursor flashes in the letter input area and the track, group, or disc is ready to be labeled.
The cursor flashes.
5 Press VOL + or – to select a letter and press ENTER.
The selected letter appears and the cursor moves to the next input position.
The buttons used for character input and their functions are listed below.
Functions | Operations |
|
|
To select a | Press VOL + or |
character |
|
|
|
To enter a letter | Press ENTER. |
|
|
To enter a name | Press ENTER for 2 |
| seconds or more. |
|
|
To insert a blank | Press END |
space before the | SEARCH and press |
cursor | VOL + at the same |
| time. |
|
|
To delete a letter | Press END |
| SEARCH and press |
| VOL – at the same |
| time. |
|
|
To switch capital | Press X. |
and small letters. |
|
|
|
To cancel | Press x or MENU. |
labeling. |
|
|
|
6 Repeat step 5, and then enter all characters of the label name.
7 Press ENTER for 2 seconds or more.
A track or disc is labeled.
To return the preceding setting
Press x.
To cancel labeling
Press x for 2 seconds or more.
Note
When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically.
Follow the procedure of the “Labeling” (page 36) to relabel a name.
Note
The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device.
For the remote control operations, see page 58.
37