Sony MZ-N710 Labeling (Name), Moving recorded tracks

For details and the remote control operation, see page 25.

Labeling (Name)

1 Enter the menu and select “EDIT” - “Name”

2 Select one of the following:

When labeling a	“	: Name”
track
When labeling a	“	: Name”
disc

The cursor appears in the display and the track, group, or disc is ready to be labeled.

3 Turn the volume control repeatedly to select a letter and press the jog lever.

The selected letter stops flashing and the cursor moves to the next input position.

The cursor flashes at the next input position.

Functions	Operation
To move the cursor to	Slide the jog lever
the left or right	(., >)
To change the letter to	Turn the volume
the one before/next one	control (VOL+, –).
To enter a letter	Press the jog lever
	(NX/ENT).
To enter a name	Press the jog lever
	for 2 seconds or
	more (NX/ENT).
To switch between	Press P MODE/ .
capital letters, small
letters, and numbers/
marks
To insert a blank space	Press	+.
To delete a letter	Press	–.
To cancel labeling	Press x for 2
	seconds or more.

4 Repeat step 3 and enter all characters of the label name.

5 Press and hold the jog lever for 2 seconds or more.

For the details and the recorder operation, see page 36.

Labeling recorded groups

1 Select “ : Name” in step 2 of “Labeling (Name)” (page 58) and do steps 3 to 5 to label a group.

For the details and the recorder operation, see page 47.

Re-labeling recordings

You can relabel recordings by following the procedure of “Labeling (Name)” (page 58).

For the details and the recorder operation, see page 37.

Moving recorded tracks

1 While playing the track you want to move, enter the menu and select

“EDIT” - “Move” - “ : Move”.

For example, “003 t Tr003” appears in the display.

2 Slide the jog lever repeatedly until the destination track number appears in the display.

For example, “003 t Tr002” appears in the display.

3 Press the jog lever to enter the selection.

58