6 Press and slide REC.
The recorder stands by for recording.
7 Play the source you want to record.
The recorder stars recording automatically when it receives the playing sound. “REC” light up in the display.
To stop recording
Press x.
z
When there is no sound from the player for about 3 seconds during
Notes
•The pause function cannot be turned on or off manually during
•Do not switch the “SYNC REC” setting while recording. Recording may not be done properly.
•Even when there is no sound on the sound source, there may be cases when recording does not pause automatically during synchro- recording due to the noise level emitted from the sound source.
•If a silent portion is encountered for approximately 2 seconds during synchro- recording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends.
Select each recording mode according to the recording time that you want.
Stereo recording is possible at 2 times (LP2) or 4 times (LP4) the normal (stereo) recording time. Monaural recording at 2 times normal recording time is also possible.
MDs recorded in monaural, LP2, or LP4 mode can be played back only on MD players or recorders with monaural, LP2, or LP4 playback mode.
(N • ENTER, ., >)
RECx
MENU
1
2 Press . or > repeatedly until “REC SET” appears in the display, and then press ENTER.
3 Press . or > repeatedly until “REC MODE” appears in the display, and then press ENTER.
continued
27