To add track marks while recording (except while
Press T MARK on the recorder (press
P MODE/ on the remote control) at the point you want to add a track mark.
You can use Auto Time Mark to add track marks automatically at specified intervals (except while digital recording) (page 29).
Combining tracks (combine)When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark.
Notes
•You cannot erase a track mark on a track that has been
•To combine groups or tracks in a disc with group settings, see page 45.
•You cannot combine tracks recorded in different recording mode.
The track numbers will change as follows:
1 | 2 | 3 | 4 |
|
Erase a track mark
123
Track numbers decrease
X
T MARK
1 While playing the track with the track mark you want to erase, press X to pause.
2 Find the track mark by pressing
..
For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for a few seconds.
3 Press T MARK to erase the mark. “MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.
z
When you erase a track mark, the date, time, and name assigned to the mark are also erased.
Note
When you erase a track mark between the two consecutive tracks that are assigned into different groups, the second track is
You can erase unnecessary tracks or all tracks in a disc.
Notes
•When you erase groups, see page 49.
•You cannot erase tracks that have been checked out from your computer. You cannot erase an entire disc if it contains a
40