Editing recorded tracks
This section explains the operations that are done on the recorder. For details on operations done on the recorder, see the pages indicated for each operation.
Before editing
You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs.
Notes
•Premastered MDs cannot be edited.
•Close the
•The recorder is recording editing results while “TOC Edit” is flashing in the display.
—Do not move or jog the recorder.
—Do not disconnect the power source.
—The lid does not open.
Labeling recordings (Name)
You can name tracks and discs using the recorder’s character palette.
Note
When you label a group, see page 47.
Available characters
•Capital and small letters of the English alphabet
•Numbers 0 to 9
•! " # $ % & ( ) * . ; < = > ? @ _ ` + – ' , / : _ (space)
Maximum number of characters per name
Track names, group names, and disc name: Approx. 200 each (containing a mixture of all available characters)
Maximum number of characters that can be input per disc
Alphanumeric characters and symbols only: Approx. 120 titles of about 10 characters each (a maximum of about 1,700 characters)
The number of titles that can be stored on a disc depends on the number of characters that are input for track names, group names, and disc name.
Note
If you enter the symbol “//” between the characters in disc names such as “abc//def”, you may be unable to use the group function.
(., >, N, VOL+,
x
X
END SEARCH
MENU
Labeling
You can label a track and a disc while the recorder is stopped, recording, or playing. Note that if you label a track while the recorder is stopped, the track must be the currently selected.
For labeling a group, see “Labeling recorded groups” (page 58).
1
2 Press . or > repeatedly until “EDIT” appears in the display, and then press ENTER.
3 Press . or > repeatedly until “Name” appears in the display, and then press ENTER.
36