Adding track marks manually

1 While the recorder is recording, press

T MARK (press P MODE/ on the remote control).

Adding track marks automatically (Auto Time Mark)

Use this feature to add track marks automatically at specified intervals when recording through the analog input connector or a microphone. This function is convenient for recording long period of time, such as lectures, meetings, etc.

1 While the recorder is recording or in recording pause, press MENU.

2 Press . or > repeatedly “REC SET” appears in the display, and then press ENTER.

3 Press . or > repeatedly “TIME MARK” appears in the display, and then press ENTER.

“MARK OFF” appears in the display.

4 Press > to show “MARK ON” in the display, and then press ENTER.

5 Press . or > repeatedly until the desired time interval appears in the display, and then press ENTER. Pressing . or > changes the time setting (Time:) by 1 minute, within the range of 1 to 99 minutes.

To cancel Auto Time Mark

Select “MARK OFF” in step 4 or stop recording.

Using Auto Time Mark to add track marks while recording

When the elapsed recording time exceeds the time interval for Auto Time Mark:

The recorder adds track marks at the point you set the time interval and from that point the recorder adds a track mark whenever the time interval has elapsed.

Example: Eight minutes of recording has been completed when the Auto Time Mark time interval is set to 5 minutes.

A track mark will be added at the 8- minute point (after the start of recording) and after each 5-minute interval thereafter.

When the time interval set for Auto Time Mark exceeds the elapsed recording time:

The recorder adds track marks when the set Auto Time Mark time interval has elapsed.

Example: Three minutes of recording has been completed when the Auto Time Mark time interval is set to 5 minutes.

A track mark will be added at the 5- minute point (after the start of recording) and after each 5-minute interval thereafter.

z

“T” appears after the track display on the recorder for track marks added by Auto Time Mark, and “T” appears before the time display on the remote control.

Notes

•If you add a track mark by pressing T MARK or X (pause), etc., while recording, Auto Time Mark will begin automatically adding a track mark each time the selected time interval has elapsed.

•The setting will be lost when the recording stopped.

30