Use the appropriate optical cable to suit the source equipment. Connect the cable firmly to the appropriate jacks.
2 While the recorder is stopped, press MENU.
3 Press . or > repeatedly until “REC SET” appears in the display, and then press ENTER.
4 Press . or > repeatedly until “SYNC REC” appears in the display, and then press ENTER.
5 Press . or > repeatedly until “SYNC ON” appears in the display, and then press ENTER.
Make connections.
1
MENU
On the remote control
1 Press DISPLAY.
Each time you press the button, the display changes as follows:
Display window on the remote control
CD
Display: C/D
CD
Track number | Elapsed time |
Track number | Track name |
| |
The number of | Group name |
the track in the | |
group | |
| |
The number of | Disc name |
tracks in the disc | |
| |
Track number | The name of the |
| sound mode |
Note
Depending on whether the group function is used or not, the operating conditions, and the disc settings, you may not be able to select certain indications or the indications may appear differently.
z
For more details about the indications in the display while playing, see “Viewing various information” (page 32).
To start/stop recording in sync with the sound source (Synchro-recording)During synchro-recording, the recorder starts and stops recording in sync with the sound source. When recording from digital equipment (such as a CD player), you can omit operating both the recorder and the sound source, and easily make digital recording. You can make synchro- recording only when the optical cable is connected.
5-way control key
(N • ENTER, ., >)
RECx