Recording tracks to an existing group

You can add a track to an existing group. This operation can be done on the recorder only.

Adding a new track at the end of the selected group

1 While the recorder is stopped and the group to which you want to add a track is selected, slide zREC to the right while pressing GROUP.

2 Play the sound source.A new track will be added at the end of the current contents within the group.Adding a track at a desired position within the selected group

1 While the recorder is play-paused at the point within the group where you want to add a new track, slide zREC to the right while pressing GROUP.

2 Press X to start recording and play the sound source.
To start/stop recording in sync with the sound source (Synchro-recording)

During synchro-recording, the starting and stopping of recording occurs are synchronized with the sound source. This simplifies digital recordings (e.g., from a CD player) since the need to operate the recorder or the sound source is eliminated. Synchro-recording is only possible with the optical cable connected.

Jog dial

1 Make connections.

Use the appropriate optical cable to suit the source equipment. For details, see “Optional accessories” (page 79).

2 While the recorder is stopped, enter the menu and select “REC Settings” - “SYNC REC” - “SYNC REC On”.

z

When there is no sound from the player for about 3 seconds during synchro-recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchro- recording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically.

41