79GB
Table of
contents Sample photo Menu Index
AF/MF Select
Selects auto focusing or manual focusin g.

1MENU t [Camera] t [AF/MF Select] t desired mode.

• If yo u turn the focusing ring when [DMF] or [Manual Focus] is sele cted, the image is enlarged
automatically to enable you to check focus area easier. You can prevent the image from being enlarged
by selecting MENU t [Setup] t [MF Assist] t [Off].
(Autofocus) Focuses automatically.
(DMF) After focusing automatically, make fine focus adjustment
manually (Direct Manual Focus).
(Manual
Focus)
Adjusts the focus manually. Turn the focusing ring right or left
to make the subject look clearer.
Notes

zUsing manual focusing effectively

“Focus fixing” is convenient when you can predict the distance
to the subject. With “Focus fixing,” you can fix the focus in
advance to the distance at which the subject is to pass.

zMeasuring the exact distance to the subject

The mark shows the location of the image sensor*. When you measure the exact
distance between the camera and the subject, refer to the position of the horizontal line. The
distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).
* The image sensor is the part that converts the light source to a digital signal.
• If the s ubject is closer than the minimum shooting distan ce of the attached lens, the focus cannot be
confirmed. Make sure you put enough distance between the subject and the camera.
18 mm
(23/32 in.)
NEX-6: NEX-5R:
18 mm
(23/32 in.)
Continued r