70GB
Table of
contents Sample photo Menu Index
Sweep Panorama
Allows you to create a panoramic image from composed images.
• If yo u cannot pan the camera across the entire subject wit hin the given time, a gray area occurs in the
composed image. If this happens, move the camera fast to record a full panoramic imag e.
• Wh en you select [Wide] in [Image Size], you may not be able to pan the cam era across the entire subject
within the given time. In such cases, we recommend that you select [Standard] in [Image Size].
• The camera shoots continuously during [Sweep Panoram a] recording, and the shutter continues to click
until shooting is finished.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• Under low light conditions, panoramic images may be blurred.
• Under flickering lights such as fluorescent light, the brig htness or color of the combined image is not
always the same.
• When the panoramic shot overall and the angle in which you fixed the focus and exposure with AE/AF
lock are extremely different in brightness, color and focus, the shooting will not be successful. If this
happens, change the lock angle and shoot again.
1Set the shooting mode to [Sweep Panorama].
2Select the shooting direction by turning the control dial.
3Point the camera at the subject for which you want to set the brightness
and focus, and then press the shutter button halfway down.
4Keep the shutter button pressed halfway
down and point the camera at the edge of
the subject.
This part will not be taken.
5Press the shutter button fully down.
6Pan the camera to the end, following the
guidance on the LCD screen.
Guidance bar
Notes
Continued r