222GB
Table of
contents Sample photo Menu Index
Troubleshooting
Troubleshooting
If you experience trouble with the camera, try the following solutions.
The battery pack cannot be installed.
•When you insert the battery pack, use the tip of the battery pack to push the lock lever.
•You can only u se an NP-FW50 battery pack. Make sure that the batte ry is NP-FW50.
The remaining battery level indicator shows an incorrect level or power runs out
quickly despite the indicator showing sufficient battery level.
•This phen omenon occurs when you use the camera in an extremel y hot or cold location.
•The batter y pack is discharged. Install a charged battery p ack.
•The batter y pack is dead. Replace the battery pack with a new one.
Cannot turn on the camera.
•Install t he battery pack correctly.
•The batter y pack is discharged. Install a charged battery p ack.
•The batter y pack is dead. Replace the battery pack with a new one.
The power turns off suddenly.
•When the cam era or battery pack is too warm, the camera displays a wa rning message and turns off
automatically to protect the camera.
•If you do not operate the camera for given perio d of time, the camera turns to power sav ing mode. To
cancel the power save, operate the camera, such as pressing the shutter button halfway down
(page173).
1Check the items on pages 222 to 228.
2Remove the battery pack, wait for about 1 minute, re-insert
the battery pack, and then turn on the power.
3Reset the settings (page 186).
4Consult your Sony dealer or local authorized Sony service
facility.

Battery pack and power

Continued r