Sony NSX-A707 manual Press Tuner Band repeatedly to select the desired band

MONO

TUNER

0-9,+10

BAND

SHIFT

~

\--- --4U, - .,/

1 Press TUNER BAND repeatedly to select the desired band.

~FM—AM7

1I

When TUNER BAND is pressed while the power is off, the power is turned on directly.

To select a band with the remote control

Press BAND while pressing SHIFT.

2 Press + DOWN or ~ UP to select a station.

Each time the button is pressed, the frequency changes. When a station is received, “TUNE is displayed for 2 seconds. During FM stereo reception, ((loll] is displayed.

To search for a station quickly (Auto Search)

Keep + DOWN or ~ UP pressed until the frequency starts to change rapidly. After tuning in to a station, the search stops.

To stop the Auto Search manually, press < DOWN or ~ UP.

●The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press MONO TUNER on the remote control while pressing SHIFT so that “MONO”appears on the display.

MO,NO

Noise is reduced, although reception is monaural.

To restore stereo reception, press these buttons so that “MONO disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER BAND. To reset the interval, repeat this procedure.

m

When the AM tuning interval is changed, ail preset stations are cleared. The preset stations have to be set again.

11 ENGLISH