Sony NSX-A707 manual ENGLISH14

If there is a 4-second or longer blank between each track, a seafch for the beginning of the current or next track during playback can be done easily.

Press + or - during playback referring to the playback side indicator (+ or >) on the display.

For example, when _ is pressed while > is displayed, playback of the next track starts.

Music sensor function may not be able to detect tracks under the following conditions:

●Blanks of less than 4 seconds between tracks

●Nc)isy blanks

●Long passages of low-end sound

●bw overall recording levels

\.-—J

—f--—— —.. .-— — —--, —

After playback on one deck finishes, the tape in the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press TAPE DECK1/2 to select the deck to be played back first.

3 Press REV MODE to select 1).

4Press 4 ➤ to start playback. f>layback continues until ■ is pressed.

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

.O

<~

\+;

&

\

Type 11tape	Tab for side A
detection
slot	&
	/

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape cletection slot.)

●120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

ENGLISH14