Sony NSX-A707 manual Connect the AC cord to an AC outlet, Shift Function

2 Ccrrrnect thesupplied antennas.

Connect the FM antenna to FM 75 Q terminals and the AM antenna to AM LOOP terminals,

AM antenna

FM antenna

R11(

Wllll Ill

pfl

~oop[

rb

7rF~

,50 [

3 Connect the AC cord to an AC outlet.

To position the antennas FIM feeder antenna:

Extend this antenna horizontally in a T-shape and fix its ends to the wall.

AM antenna:

Position to find the best possible reception.

To stand the AM antenna on a surface

Fix the claw to the slot.

Inserting batteries

Detach the battery cover on the rear of the remote control and inserf two R6 (size AA) batteries.

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

To use SHIFT on the remote control

Buttons @ have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button while pressing SHIFT.

+*/E PRESET on the remote control

The function is same as that of +b on the main unit.

SHIFT

FUNCTION

[m3

●Be sure to connect the speaker cords correctly. Improper (connections can cause short circuits in SPEAKERS terminals.

●Do [not leave objects generating magnetism, such as credit cares, [near the speakers, as these objects may be damaged.

●Do not bring the FM antenna near metal objects or curtain rails.

●Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.

●Do not unwind the AM antenna wire.

m

●If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

●The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight

-Other remote controls are used nearby (those of a television, etc.)

ENGLISH 4