Sony NSX-A707 Inserting Blank Spaces, Insert the tape to be recorded on into deck, Preparation

This section explains how to record from the tuner, CD player, or external equipment.

3

Preparation

●Use Type I (normal) and Type II (high/CrOz) tapes for recording.

●Set the tape to the point where recording will start.

1Insert the tape to be recorded on into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

-A EJECT

2 Press. REV MODE to select the reverse mode.

To record on one side only, select Z.

To record on both sides, select =) or C=>,

3 Press function (CD, TUNER, VIDEO/AUX or MD) and prepare the source to be recorded.

To record from a CD, press CD and load the disc(s).

To record from a radio broadcast, press TUNER and tune in to a station.

To record from a connected source, press VIDEO/AUX or

MD.

4 Press ● REC/REC MUTE to start recording.

When the selected function is CD, playback and recording start simultaneously.

When recording from a connected source, start playback of the source.

To stop recording, press 1.

To pause recording, press II. (Applicable when the source is TUNER or VIDEO/AUX) To resume recording, press it again.

Sound adjustment during recording

The output volume and tone (except BBE and Rhythm play function) of the speakers or headphones may be freely varied without affecting of the recording.

kl..,n,#d,a,u,@g&c`,,wwvdsw*m*,#a-H;*a..w**w*w&q&mw.-w,mm&Td*#ws**Hm?&Ps#4j*alm.

INSERTING BLANK SPACES

Insertion of 4-second blank spaces enables you to activate the Music Sensor function. (Applicable when the source is TUNER, VIDEO/AUX or MD.)

1 Press ● REC/#EC MUTE during recording or while in recording pause mode.

~on the display flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the recording pause mode.

2Press 11 to resume recording.

To insert a biank s~ace of iess than 4 seconds, press ●

REC/REC MUTE again while ~ is flashing.

To insert blank s~aces of more than 4 seconds, after the deck enters recording pause mode, press ● REC/REC MUTE again. Each time the button is pressed, a 4-second blank space is added.

To erase a recording

Make sure the microphone is not connected to this unit and the Rhythm piay function (page 7) is canceled.

1insert the tape to be erased into deck 2 and press TAPE DECK

1/2 to display “TP2“.

2Set the tape to the point where the erasure is to be started.

3Set the reverse mode by pressing REV MODE.

4Press ● REC/REC MUTE to start the erasure.

17 ENGLISH