Upgrading your VAIO computer

n N

Sony VAIO Desktop User Guide

80

Installing a new memory module

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer.

To add or change a memory module, proceed as follows:

1Shut down the computer, unplug it, and remove any peripheral devices. Wait for the computer to cool down.

2Open the unit (see Opening the side cover (page 75)).

3Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the DIMM slots.

You must remove the power supply before installing the memory modules. Remove the power supply by following these steps:

❑Remove the screw that secures the power supply to the rear of the chassis.

❑Pull the tab that latches the power supply to the chassis.

❑Slide the power supply up until the power supply clears the chassis.

❑Rotate the power supply to an upside down position and rest it on top of the chassis where the hard drive is located.

4Handle the memory only by the edges, and remove it from its anti-static package.

5Locate the notch on the bottom edge of the memory module (1).

6Align the memory module over the slot, making sure the module is facing the correct way (2).