Upgrading your VAIO computer

n N

Sony VAIO Desktop User Guide

81

7Press evenly against the memory module's upper corners. The end latches snap into position automatically, as shown (3):

8Reinstall the power supply and any add-on cards or components you removed.

9Reinstall the power supply by following these steps:

❑Rotate the power supply to its original position and slide it into the chassis until the tab snaps into position.

❑Replace the screw that secures the power supply to the rear of the chassis.

10Replace the side cover as described in Closing the side cover.

✍There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.

!Use only PC-2100 DDR SDRAM DIMM modules.