Sony PCV-7766, PCV-RX4 9Reinstall the power supply by following these steps:, 5Locate the notch on the bottom edge of the memory module (1)

Upgrading your VAIO computer n N

Sony VAIO Desktop User Guide

76

5Locate the notch on the bottom edge of the memory module (1).

6Align the memory module over the slot, making sure the module is facing the correct way (2).

7Press evenly against the memory module's upper corners. The end latches snap into position automatically, as shown (3):

8Reinstall the power supply and any add-on cards or components you removed.9Reinstall the power supply by following these steps:

❑Rotate the power supply to its original position and slide it into the chassis until the tab snaps into position. Make sure you do not damage the power cables in the process.

❑Replace the screw that secures the power supply to the rear of the chassis.10Replace the side cover as described in Closing the side cover (page 78).

✍There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.

!Use only PC2100 DDR SDRAM DIMM modules.