Manuals / Brands / Computer Equipment / Personal Computer / Sony / Computer Equipment / Personal Computer

Sony PCV-7766, PCV-RX4 Connecting an i.LINK™ device, ❑Supply 10V to, ❑The 6-pini.LINK™ connector on the back of your system can:

1 90

Download 90 pages, 1.51 Mb

Connecting peripheral devices

n N

Sony VAIO Desktop User Guide

49

Connecting an i.LINK™ device

Your VAIO computer includes a 4-pin i.LINK™ port on the front of the system and a 6-pin i.LINK™ port on the back of the system. Use these connectors to connect an i.LINK™ device such as a digital video camera recorder or to link up two VAIO computers so you can copy, delete or edit files.

❑The 6-pin i.LINK™ connector on the back of your system can:

❑Supply power from the computer to the connected device if the device has a 6-pin connector, and

❑Supply 10V to 12V.❑The 4-pin i.LINK™ port cannot supply power to a connected device.

The i.LINK™ connectors supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of the external device.

The i.LINK™ features available may vary depending on the software applications you use. Refer to the documentation that came with your software for more information.

The i.LINK™ cables that are compatible with your VAIO desktop include cables with the following part numbers: VMC-IL4415, VMC-IL4435, VMC-IL4615, VMC-IL4635, VMC-IL6615, and VMC-IL6635. Sony computer supplies, accessories and peripherals can be purchased from your local retailer or from the Sony website:

http://www.sonystyle-europe.com

✍An i.LINK™ connection with other compatible devices is not fully guaranteed.

You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices.

The i.LINK™ connection varies depending on the software applications, operating system and i.LINK™ compatible devices you use. Refer to the documentation that came with your software for more information.

Check the working conditions and OS compatibility of i.LINK™-compatible PC peripherals (HDD, CD-RW drive etc.) before you connect them to your VAIO desktop.

Contents

Page Read this first Notice Trademarks ENERGY STAR® Environmental information Safety information Warnings ❑Magnets ❑Magnetic bracelets Audio/video Connectivity ❑Never install modem or telephone wiring during a severe lightning storm Regulatory information Disposing of batteries Welcome Documentation pack Printed documentation Online documentation Using partitioned drives VAIO-Link Customer Service Guide Online Help Quick Start Your Sony VAIO desktop and its accessories Ergonomic considerations Position of the keyboard and mouse Position and viewing angle of the monitor Furniture and posture Lighting Ventilation – Using your VAIO desktop Locating connectors Starting your computer Shutting down your computer Using the keyboard Page Combinations and functions with the Windows® key Combinations and functions with the <Fn> key Indicators Using the shortcut keys Setting up the monitor Connecting the monitor Using the mouse Using the CD and DVD drives Writing CD/DVDs Playing DVDs Using the floppy disk drive Inserting a floppy disk Removing a floppy disk Using the modem Expansion capabilities Using the Memory Stick™ Why Memory Stick™ Generic Memory Stick™ MagicGate Memory Stick™ ❑the logo printed on it ❑and a protruding dot located on the back MagicGate SonicStage Compatible devices Audio: Other: Write-protectinga Memory Stick™ Inserting a Memory Stick™ Removing a Memory Stick™ Using the Net MD drive (depending on your model*) Volume level when playing a MiniDisc Inserting a MiniDisc Removing a MiniDisc Using power saving modes Using Standby mode To activate Standby mode manually, use one of these two methods: Use the Standby button: Press the Standby button at the top of the keyboard The computer goes into Standby mode, indicated by the umber light Using Hibernate mode Page Connecting peripheral devices Connecting an external display Connecting a projector Connecting a TV Connecting an external microphone Connecting a Universal Serial Bus (USB) device Connecting a printer Connecting an i.LINK™ device Connecting a digital video camera recorder Connecting two VAIO computers Connecting to a network Getting help Sony's support options Printed documentation supplied with your VAIO desktop Online user guides Software Guide About the software Other sources of information Troubleshooting About the computer and software <F1 <F2 Press <F1> to continue, <F2> to enter setup <F2 Exit <Delete Task Manager Shut Down Turn Off Adding memory If your computer locks up while playing a My computer or software program is not responding To end the application that has stopped responding, proceed as follows: 1Press <Ctrl>+<Alt>+<Delete If you have not changed the default settings, you will enter the Task Manager Windows® locks up during shutdown To search Windows® Help for troubleshooting information, proceed as follows: 1From the Start menu, select Help and support 2Click Fixing a problem 3Use the browse and search functions to find a solution About the display <D 2Click Appearance and Themes, then Taskbar and Start Menu Taskbar and Start Menu Properties Screen Resolution About CDs and floppy disks I cannot play a DVD-ROM ❑If you see the video but cannot hear sound, check all of the following: ❑Make sure the mute setting is off in your DVD player software Check the master volume setting in the Volume Control 3Select Properties Recordings Desktop CD/DVD recording About sound About the modem About peripherals 2Under Printer Tasks, click Add a printer Add Printer Wizard Finish 1Click on Start and then Printers and Faxes Refresh About digital video captures and DVgate About i.LINK™ devices Sharing Upgrading your VAIO computer Opening the side cover 5Position the main unit so the back panel is facing you 7Lift the side cover away from the unit and set it aside Inserting a PCI add-onboard Adding memory Installing a new memory module 5Locate the notch on the bottom edge of the memory module (1) 8Reinstall the power supply and any add-oncards or components you removed 9Reinstall the power supply by following these steps: ❑Replace the screw that secures the power supply to the rear of the chassis 10Replace the side cover as described in Closing the side cover (page 78) Viewing the amount of memory Closing the side cover Precautions On handling the hard disk On using the power source On handling your computer On handling the LCD screen (if applicable) On handling floppy disks On handling compact discs On handling Memory Sticks™ Glossary