Topics

4Check the connections between your speakers and the computer.

5Go to Windows® System Properties to verify that the drivers are installed properly, by following these steps

a.From the Start menu, point to Settings, and then click Control Panel.

b.Click Systems and the System Properties dialog box appears.

c.Select the Device Manager tab to view the installed drivers.

❑A dirty or damaged disc may cause the computer to stop responding while it tries to read the disc. If necessary, remove the disc and check that it is not dirty or damaged.

Topic: When I click an application icon, the message “You must insert the application CD into your drive” appears and the software does not start.

❑Some titles require specific files that are located on the application’s CD- ROM. Insert the disc and try starting the program again.

❑Check to make sure you inserted the CD-ROM with the label side facing up.

Topic: Why doesn't my CD-RW drive record at the highest speed?

You must use 8x CD-RW or 12x CD-R media to achieve optimum performance.

If you must use other media and are having difficulty formatting non-8x CD-RW media, change the write speed from 8x to a lower setting. To change the write speed from the default to a lower speed:

1From the Start menu, select Programs, select Adaptec Easy CD Creator 4 and then click Create CD.

2Click Audio and then click Audio CD.

3From the Tools menu, click CD Drive Properties. The CD Drive Properties dialog box appears.

4From the Write Speed drop-down list, select a lower setting.

5Click Close.

77